The combine chains(GETECHAIN) should be a common industrial chain. In the industrial production process, especially in many food processing, the combine chains are used in a pipeline manner, and the use range is wide and the frequency of use is high. Therefore, wear and tear often occur, and if it is improperly used, Great damage to the combine chains.
There are two main manifestations of failure in the combine chains: one is the failure caused by wear and the other is the failure caused by fatigue.
The failure of wear is the most common and most obvious form of expression. There are many reasons for this failure. The main reason is the poor quality of the combine chains and the improper operation of the workers. The most prone to wear on the chain is the sprocket and pin. The wear of these two parts is mainly due to insufficient local lubrication. Therefore, in order to avoid this phenomenon, the operator should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method. After slight wear on the sprocket, the sprocket can be reversed so that the lighter side faces the combine chains. In addition, if the use environment is bad or the lubrication is poorly sealed, the hinge will be worn. Once the chain hinge wears, the chain-link becomes longer, and it is easy to cause tooth skipping or chain detachment during work, which reduces the chain life and accelerates the chain failure.
Let us talk about the failure caused by fatigue. At present, most factories in China are workers resting and the machines are not resting. Therefore, the combine chains are often overused and fatigue failure occurs, which means that the chain is subjected to excessive load during operation, resulting in stress. Uneven, it is easy to break or be squeezed. In this case, our chain factory can only solve it by strengthening the parts.
In addition, overload pull-off is also a common form of failure during low-speed heavy-duty transmission. When the combine chains have a certain service life, the lubrication and sealing are poor, or the working condition is bad, the wear will be accelerated, resulting in a significant drop in the ultimate power and a failure of the overload.
Click Driving chain manufacturer to learn about more information.
kimminseok 