If you want the chain to achieve the desired conveying effect, we can use multiple rows in parallel. China chain factory(GETECHAIN) tells you that the chainplate conveyor can be made very wide and form a differential speed. using the speed difference of multiple rows of conveyor chainplates, the multiple rows of conveyor can be changed into single row of the conveyor without extrusion. then, for a series of operations, the requirements of a single row of conveyor realized by the equipment can be the same, and the single row can be made into multiple rows and walk slowly. then, the storage capacity can be generated. we can make the head and tail of the two chain plate conveyors into overlapping mixed chains so that the products are in a dynamic over-state and the conveyor line can not hold materials, thus the products can be transported.
Wear failure is the most common and obvious form of expression. There are many reasons for this failure. The main reasons are poor chain material and improper operation of workers. The most easily worn parts of the chain as a whole are sprocket and pin shaft. The wear of these two parts is mainly due to insufficient local lubrication, so in order to avoid this phenomenon, operators should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method.
Many production enterprises pay more and more attention to the chain, especially for some production line enterprises, mainly because the chain is a very important part of the conveyor, and the chain is used as the bearing surface on the conveyor, in which the motor is used as the power source to make it realize the effect of conveying things together.
If you are interested in our products, you can click Roller chain to learn more information.
kimminseok 