(1) Do not understand the common sense of maintenance and adjust by yourself, and adjust the hollow pin chain(GETECHAIN) by mistake. The concept of this animal is confused. It only knows that the adjustment of the hollow pin chain is the category of maintenance. I do not know how to adjust is the correct standard.
(2) If the hollow pin chain is seriously worn, but time or economy do not allow it, or the special-shaped vehicle cannot purchase the same type of toothed disc at that time, the hollow pin chain shall be adjusted tightly to keep the vehicle running.
(3) When replacing the hollow pin chain with the gear disc, the eccentric gear disc that is out of the park is mistakenly installed on the motorcycle, causing the hollow pin chain to tighten and loosen. During inspection and adjustment, the loose end is accidentally encountered while the other end is too tight. No matter which of the above causes the hollow pin chain to be adjusted too tightly, it will greatly reduce the service life of the chain and the toothed disc. When the hollow pin chain is adjusted too tightly, the contact pressure with the tooth plate increases, the hollow pin chain is easy to stretch, the link plate is easy to deform or break, and the chain roller will also be broken. In addition, the tooth plate will be worn too early to make the tooth shape sharp and serrated in severe cases.
Click conveyor chain to learn about more information.
kimminseok 